Standing-seam cladding

Stainless steel advantages: 

> Possibility of long lengths ( up to 6m according to technical restraints).

> Possibility to have continuity between the roof covering and the facade.



This type of cladding, used for traditional covering is defined by its linear lines and meets all architectural demands.

Assembled on or off-site in a workshop using strips of stainless steel, these systems are joined together and fixed onto a single, rigid, wooden substrate along their length by folding the pre-formed edges.
The folding and closure of the seam is done in a conventional manner using specific tools.


Example of a standing-seam


Fixings must be in stainless steel for reasons of corrosion.